CCNA 2020 200-125 Video Boot Camp With Chris Bryant

Module 1: Introduction & Lab Setup

⏳ 30 minutes

• Overview of CCNA exam domains and lab environment configuration.

• Install Cisco Packet Tracer or set up real-device topologies.

Module 2: Network Fundamentals & IP Addressing

⏳ 1 hour

• Review OSI/TCP-IP models, cabling, and device roles.

• Calculate IPv4 & IPv6 subnets and assign addressing schemes.

Module 3: Ethernet Switching & VLANs

⏳ 1 hour 15 minutes

• Configure VLANs, trunking (802.1Q), and inter-VLAN routing.

• Implement Spanning Tree Protocol (STP) variants and EtherChannel.

Module 4: Routing Concepts & Static Routing

⏳ 1 hour

• Understand routing tables, administrative distance, and packet forwarding.

• Configure and verify static routes and default gateways.

Module 5: Dynamic Routing Protocols (RIP, OSPF, EIGRP)

⏳ 1 hour 30 minutes

• Deploy RIP v2, OSPF single-area, and EIGRP in lab topologies.

• Troubleshoot neighbor adjacencies and route propagation.

Module 6: WAN Technologies & VPN Basics

⏳ 1 hour

• Configure GRE tunnels, DMVPN phases, and IPsec fundamentals.

• Explore broadband and MPLS WAN options.

Module 7: Infrastructure Services

⏳ 1 hour

• Set up DHCP, DNS, and NAT for address translation.

• Configure SNMP, Syslog, and NetFlow for monitoring.

Module 8: Network Security Fundamentals

⏳ 45 minutes

• Apply standard and extended ACLs on routers.

• Implement port security, DHCP snooping, and device hardening.

Module 9: Automation & Programmability

⏳ 30 minutes

• Introduction to REST APIs, JSON payloads, and Cisco DNA Center basics.

• Automate simple tasks with Python and Ansible playbooks.

Module 10: Exam Preparation & Practice Labs

⏳ 1 hour

• Review key concepts through practice questions and timed labs.

• Tips for exam strategy, simulation, and troubleshooting scenarios.

Get certificate